Vista Customer Detective Work

Wednesday, May 7th, 2014

One might say the most challenging part of being an automotive service technician at Taskers Automotive in Vista California is diagnosing a problem before it can be fixed.

Cars are made up of a bunch of complex systems. There usually could be a number of reasons for any given symptom. So it’s challenging to track down the actual cause of the problem. And it can be frustrating for the vehicle owner because it can take time and money to get to the bottom of a problem. If it’s not something obvious, it’s easy for the customer to focus on the fixing and not the diagnosing.

Let us introduce you to something we’ll call Customer Detective Work – that is helping your Vista California technician find clues to what’s wrong.

We start with the detective basics: What, Where and When. Play along with me. You come in to Taskers Automotive and your car is making a funny sound.

  • Q: Where’s the sound?
  • A: Around the right front wheel.
  • Q: What kind of sound?
  • A: Kind of a clunk, clunk sound.
  • Q: When do you hear the sound?
  • A: When I turn and accelerate.
  • Q: Right and left? Forwards and back?…

Do you see where we’re going? You’re gathering additional information to help your Vista California technician know where to start. Based on your car and the tech’s experience, he’ll know where to look and can start with the obvious suspects.

You can see how that would be more helpful than dropping the car off with a note that says “making a funny noise”.

When you think you need to bring a vehicle in, make some notes about the problem. Rather than just saying “it’s leaking”, tell the tech the color of the fluid, and approximately where under the car you see the puddle.

Things like ‘the car is stalling or sputtering’ are often very hard to diagnose because they’re intermittent. They may not happen every time you drive and usually aren’t happening when you actually bring the car in. So, it is a big help for you to describe what’s happening in as much detail as possible.

Your Vista California technician at Taskers Automotive will need to be able to duplicate the problem if possible so he needs to know details, like ‘it stalls after it’s been driven for about 20 minutes and I go over 50 miles an hour’.

If the tech can experience the problem personally, he’s better able to make a diagnosis and repair. And, then test to see if the repair solved the problem.

On Board Diagnostics For Your sedan

Wednesday, March 12th, 2014

Make an appointment with Taskers Automotive to have your on board diagnostics analyzed.
1806 E Vista Way
Vista, California 92084
760.724.2184

Today we’re going to talk about on-board diagnostics and the questions we hear from folks around Vista California who need answers about diagnostic services. They want to know what diagnostics are, what’s involved and what the benefits are. They really want to understand the value of diagnostic scans by a trained technician in Vista California.

These are valid concerns. If you don’t understand something it’s really hard to know its value. Let’s start with some history.

Since 1996, all cars and light trucks in Vista California have been required to use a standardized diagnostic system to help repair technicians determine what’s wrong with your vehicle. The diagnostic system works with the vehicle’s Engine Control Module – the computer that controls many engine functions.

The computer monitors dozens of components and processes. Depending on what the sensors read, the computer will make adjustments to compensate for conditions and minor problems. When there is a condition that it can’t adjust for, the computer will turn on the check engine light.

It is also called the ‘service engine soon’ light on some vehicles. The warning light signals you to get into your Vista California service center so that the trouble code can be read and the problem can be fixed. Your service center will have a scan tool and powerful software that will help the technician diagnose the problem.

If you’ve searched for check engine light on the internet, you may have seen that you can buy an inexpensive scanner or go to an auto parts store to have the trouble code read to tell you exactly what’s wrong.

That’s a common myth. The code itself doesn’t tell you what’s broken. It starts you looking in the right place. It tells you what engine parameter is out of range – but it won’t tell you what’s wrong or how to fix it.

Let’s say you think your daughter has a fever. You take her temperature and it reads one 102 degrees. You’ve confirmed a fever, but you don’t know what’s causing it. Is it a 24 hour flu, an infection, appendicitis or leukemia? A fever is a symptom of all of these medical problems, but it takes a skilled physician’s examination and additional diagnostic tests to find out what is actually causing the fever.

An example of a trouble code could be: P0133, which reads ‘Bank 1 sensor 1 circuit slow response’. This means that the front oxygen sensor has a slow response time to changes in the air-fuel mix. If that’s all you knew about cars, you would think your oxygen sensor was broken and would replace it. Now, it could be the oxygen sensor – but it could also be a bad or contaminated airflow sensor, exhaust leak, electrical problem, an intake manifold leak or any of a number of other things.

You can imagine a lot of oxygen sensors have been replaced because of that code. So the on-board diagnostics point the way to where the trouble lies, but it takes some skill and high-tech equipment to actually pinpoint the problem. The cheap scan tools that a consumer can buy do not have the ability to retrieve some of the operating history that’s stored in the engine control computer. That history’s very helpful in diagnosing the problem. Service centers like Taskers Automotive invest a lot of money in high-end diagnostic tools to help solve the mystery and get you back on the road as soon as possible without replacing a lot of parts that don’t need replacing.

So, on-board diagnostics provide a powerful starting place for a highly-trained, well-equipped technician to get to the bottom of your problem. When your check engine light comes on, get it checked at Taskers Automotive. If the light burns steady – don’t panic. Get in to Taskers Automotive soon to have the engine scanned. A flashing check engine light means that there is a severe engine problem. Get in as soon as you can – waiting too long can lead to very expensive damage.

And try to not drive at high speed or tow or haul heavy loads with a flashing check engine light.

Ethics of Automotive Repair in Vista

Wednesday, November 20th, 2013

We're going to be talking about the ethics of automotive repair. It seems like news outlets really like hit-and-run reporting; they hit everyone from groceries stores to retail to physicians. And the Vista automotive service and repair industry hasn't been given a pass either.

Unfortunately, every profession in Vista has some bad actors that hurt the reputation of everyone else. On the automotive side, industry associations and professional licensing organizations are very committed to high ethical standards.

Yet some people remain uncomfortable with Vista automotive service and repair. It may start with the fact that our vehicles are a big investment and we rely on them for so much in our lives. That alone guarantees our attention. And how well we understand the recommendations really impacts our comfort level.

If we understand what's recommended and the benefits of taking care of the work – and the pitfalls of putting it off – we'll have more trust in the recommendation. So communication is key. It's like going to the doctor; If she's using medical jargon and takes a lot of basic medical knowledge for granted, we have a hard time following her train of thought. It can be like that with your Vista service advisor too. He's so familiar with all things automotive, he may forget you don't know a PCV from an EGT.

If you don't understand what your doctor's talking about: ask some questions. If you don't understand what your Vista automotive advisor's talking about: ask some questions.

Let's go back to those ethical standards; when we hear a repair recommendation, we always ask ourselves, "Is this really necessary?" Well, here's the industry standard:

If a technician tells you that a repair or replacement is required it must meet the following criteria:

  1. The part no longer performs its intended purpose
  2. The part does not meet a design specification
  3. The part is missing

For example, it you take your car in for a grinding noise when you step on the brakes, you may just think you need new brake pads. After the inspection, the technician at Taskers Automotive says that you have a cracked rotor and need to replace it.

If you tried to get him to simply put new pads on, he would say that if you didn't want to replace the rotor; Taskers Automotive would ethically have to refuse the repair.

To just put pads on a cracked rotor would have been very wrong. The brakes could've failed at anytime and needed to be repaired – not just have a band-aid slapped on them.

Now, looking at something not so serious, the technician may suggest repair or replacement if:

  1. The part is close to the end of its useful life – just above discard specifications or likely to fail soon
  2. To address a customer need or request – like for better ride or increased performance
  3. To comply with maintenance recommended by the vehicle's manufacturer
  4. Based on the technician's informed experience

Of course, the technician has the burden of making ethical recommendations and properly educating their customers. For the customer, if you are uncomfortable with a recommendation, ask some questions. More information is always a good thing.

If you have any questions, just give us a call or stop by

Taskers Automotive, your Vista Auto Repair Specialist. 1806 E Vista Way Vista CA 92084 760-724-2186